Peavey Pro Kit 2 By getinthemix

2x UL12 Speakers
2x UL115 Bass Bins
1x PV2600 Power Amp
2x Linking Poles
All Cables Needed
Free delivery

Peavey Pro Kit 2 By getinthemix

Instock: Yes
Super fast delivery on this item:Tuesday
UK mainland delivery on orders containing this product is FREE

£1,450.00

Click to view prices on finance

This pro Peavey package kit 2 sounds amazing, fully loaded with 15" 500watt RMS UL115 bass bins and 2x UL12 12" 500watt RMS tops each with Black Widow drivers for mind blowing bass and clear vocal quality thanks to the high-end compression tweeters installed into the tops, The amplifier is a PV2600, renowned for extreme reliability and sound quality with built-in crossover adjust, All cables are included and are good quality Neutrik type and linking poles to go between the bins and tops. Overall a fantastic sounding package and highly recommended by all at getinthemix.co.uk.

UL12 Speaker Spec -

500 Watts RMS continuous

1000 Watts program

2000 Watts peak

4 Ohms.

12' (305mm) BlackWidow® woofer, cast frame with field-replaceable basket.

RX"22 compression driver coupled with a CD-Horn.

Dispersion: 90 H x 45 V.

Frequency response: 80 Hz - 17.5 kHz.

Efficiency: 96dB.

Neutrik® Speakon® connectors.

Full range and bi-amp operation with Sound Guard".

Mid-range contour EQ switch.

Resilient carpet covered.

Silver steel grille.

Alloy stand adaptor.

Teardrop handles.

Lightweight Poplar Plywood construction.

Made in the UK.

Dimensions: 22.2' (565mm)H x 17.5' (445mm)W x 16.1' (410mm)D.

Weight: 44.1lbs (20kg)

UL115 Bass Bin Spec -

500 Watts RMS continuous, 1000 Watts program, 2000 Watts peak

4 Ohms

15' (381mm) BlackWidow sub woofer, cast frame with field-replaceable basket

Frequency response: 60 Hz - 300 H

Efficiency: 99dB

Neutrik Speakon connectors

Full range and bi-amp operation with high pass output

Resilient carpet covered

Silver steel grille

Satellite pole mounting

Teardrop handles

Lightweight Poplar Plywood construction

Made in the UK

Dimensions: 25' (635mm)H x 22.4' (570mm)W x 19.9' (505mm)D

Weight: 55.1lbs (25kg)

PV2600 Amp Spec -

Power Output: 4 ohms 900w RMS / 1800w program per channel

Power Output: 8 ohms 550w RMS / 1100w program per channel

Power Output Bridge Mode: 8 ohms 1800w RMS / 3600w program

DDT" COMPRESSION: Automatic, switchable with LED indicator

COOLING SYSTEM: Two-speed DC fan, air flow back to front

LOW CUT FILTER: -3 dB @ 40 Hz, 12 dB per octave

CROSSOVER: 150 Hz, 4-pole Linkwitz-Riley approximation

INPUTS: Electronic balanced, with Barrier Strip or XLR, TRS 1/4" (6.3 mm) jack.
These are combination sockets which fit either a 6.3mm (1/4") jack male in the centre or an XLR male

CROSSOVER OUTPUTS: Low/Thru and High, TS 1/4" (6.3 mm) jack

AMPLIFIER OUTPUTS: 3 x Speakons for Chan A, Chan B and Bridge and Binding Posts

LED INDICATORS: Red, DDT/clipping; Yellow, signal; Green, power

AMP PROTECTION: Full short circuit, open circuit; over-temp thermal; RF; stable into any load

LOAD PROTECTION: Turn on/off muting, DC (triac crowbar), low-cut filter

DIMENSIONS: Height: 2 U rackmount 3.5" (8.9 cm), Width: 19" (48.3 cm), Depth: 15.5" (38.0 cm)

WEIGHT: 22.3kgs (49lbs)