 PV-1500 power amp, This is a Peavey PV1500 power amplifier with 500w RMS (100w program) power per channel at 4 ohms, The Peavey PV-1500 PA power amplifier is perfect for live bands, DJs, clubs, discos, schools, church halls, conference venues and installation, in a compact 2 U rack size, The Peavey PV 1500 works as a standard full range power amplifier and also features two built-in 150 Hz crossovers for subwoofers. With the crossover selected, the sub frequencies are sent to the speaker outputs to power subs and the higher frequencies are sent to the "HIGH OUT" jack sockets for connection to a separate amplifier for 2-way PA configurations. In addition, the sub 150Hz frequencies are also sent to the "THRU LOW OUT" jack sockets for connection to a second separate sub power amplifier if required.  Power Output: 4 ohms 500w RMS / 1000w program per channel Power Output: 8 ohms 300w RMS / 600w program per channel Power Output Bridge Mode: 8 ohms 1000w RMS / 2000w program DDT" COMPRESSION ++: Automatic, switchable with LED indicator COOLING SYSTEM: Two-speed DC fan, air flow back to front LOW CUT FILTER ++: -3 dB @ 40 Hz, 12 dB per octave CROSSOVER ++: 150 Hz, 4-pole Linkwitz-Riley approximation INPUTS ++: Electronic balanced; Barrier Strip, XLR, TRS 1/4" (6.3 mm) CROSSOVER OUTPUTS ++: Low/Thru and High, TS 1/4" (6.3 mm) AMPLIFIER OUTPUTS: Speakons for Chan A, Chan B and Bridge; Binding Posts LED INDICATORS ++: Red, DDT/clipping; Yellow, signal; Green, power AMP PROTECTION: Full short circuit, open circuit; over-temp thermal; RF; stable into any load LOAD PROTECTION: Turn on/off muting, DC (triac crowbar), low-cut filter DIMENSIONS: Height: 2 U rackmount 3.5" (8.9 cm), Width: 19" (48.3 cm), Depth: 15.5" (38.0 cm) WEIGHT: 20.5kg (45lbs) |
Show Main Menu
