Package With Peavey PRO15 PROSUB & PV2600


Peavey DJ Equipment

Add a comment on this product		Package With Peavey PRO15 PROSUB & PV2600

  • 2x Pro Sub's
  • 2x Pro 15's
  • 1x PV2600 Amp
  • 2x Poles
  • All Cables

Package With Peavey PRO15 PROSUB & PV2600
Instock: Yes
Super fast delivery on this item:Tuesday
UK mainland delivery on orders containing this product is FREE
£899.00


Click to view prices on finance
Click to view full product info
A pro sounding package comprising of two Pro-Sub's with built-in crossovers and 15" bass drivers, two Pro15 full range top cabs with 15" bass units and compression tweeters complete with a PV2600 mind blowing power amp by Peavey and all cables needed, This kit is ideal for pro mobile disco or small bar use and is fantastic value for money with great low down bass and crisp vocal quality from the compression tweeters
Click to view full technical info

Pro Sub Spec -

-300 Watts RMS continuous, 500 Watts program, 1000 Watts peak
-4 Ohms
-15" (381mm) woofer
-Frequency response: 45 Hz - 300 Hz
-Efficiency: 98dB
-Two 1/4' (6.35mm) jack and two Neutrik® Speakon® sockets
-High pass output for mid/high frequency satellite
-Resilient carpet covered
-Silver steel grille
-Satellite pole mounting
-Teardrop handles
-Made in the UK

Pro Sub Dimensions & Weight

Dimensions: 19.9' (505mm)H x 26' (660mm)W x 19.1' (485mm)D
Weight: 58.4lbs (26.5kg)

Pro 15 Spec -

  • 300 watts RMS
  • 15" bass driver
  • 1" compression driven horn
  • High frequency limiter
  • Two 1/4" jack sockets
  • Two speakon sockets
  • Internal stand adaptor
  • Made in the UK
  • 22kg
  • 4 ohm

    PV2600 Amp Spec -

  • Power Output: 4 ohms 900w RMS / 1800w program per channel
  • Power Output: 8 ohms 550w RMS / 1100w program per channel
  • Power Output Bridge Mode: 8 ohms 1800w RMS / 3600w program
  • DDT" COMPRESSION: Automatic, switchable with LED indicator
  • COOLING SYSTEM: Two-speed DC fan, air flow back to front
  • LOW CUT FILTER: -3 dB @ 40 Hz, 12 dB per octave
  • CROSSOVER: 150 Hz, 4-pole Linkwitz-Riley approximation
  • INPUTS: Electronic balanced, with Barrier Strip or XLR, TRS 1/4" (6.3 mm) jack.
    These are combination sockets which fit either a 6.3mm (1/4") jack male in the centre or an XLR male
  • CROSSOVER OUTPUTS: Low/Thru and High, TS 1/4" (6.3 mm) jack
  • AMPLIFIER OUTPUTS: 3 x Speakons for Chan A, Chan B and Bridge and Binding Posts
  • LED INDICATORS: Red, DDT/clipping; Yellow, signal; Green, power
  • AMP PROTECTION: Full short circuit, open circuit; over-temp thermal; RF; stable into any load
  • LOAD PROTECTION: Turn on/off muting, DC (triac crowbar), low-cut filter
  • DIMENSIONS: Height: 2 U rackmount 3.5" (8.9 cm), Width: 19" (48.3 cm), Depth: 15.5" (38.0 cm)
  • WEIGHT: 22.3kgs (49lbs)


    • Link to us | Designed, built, powered and Search Engine Optimisation by High Position